LEGO Architecture meets BIM – Part 22: 3D Printing

Introduction

Over the past couple of years 3D printing has very much been in the main stream media. So the concept of 3D printing is largely understood by even those not involved the construction industry. 3D printing can produce some incredible outputs however this relies of course upon on high quality inputs! Our LEGO Architecture meets BIM project has of course a robust 3D model at the heart of it so producing a 3D printed version is relatively straightforward.

So for this post I enlisted the help of Hobs Studio who amongst other services provide a 3D Printing service. They kindly printed our LEGO model for me which now takes pride of place in our Sheffield studio. Thanks particularly to Michelle Greeff (Managing Director), Lee Basil (Business Manager) and Robbie Jenkins (3D Print Technician) for their help with this! As with all contributions to the blog its very much appreciated.

The types of outputs and materials used vary depending on what you need so I won’t go into detail on this. More about Hobs Studio’s 3D Printing service and loads of useful information on 3D printing can be found here including more information on the different types of 3D Printing.

Also a thank you to my Bond Bryan colleague Phil Grayston for the photography of the 3D printed model.

The LEGO model itself is actually 100 times larger than the real thing for various technical reasons. So in order to send the file to Hobs Studio I simply had to save as a .STL file at a scale of 1:100. I provided this file to them and what I got back is seen below:

The 3D Printed Model

Image: Image o1 (click to enlarge)

Image: Image 02 (click to enlarge)

Image: Image 03 (click to enlarge)

Image: Image 04 (click to enlarge)

Image: Image 05 (click to enlarge)

Image: Image 06 (click to enlarge)

Image: Image 07 (click to enlarge)

Image: Image 08 (click to enlarge)

I particularly like this final image as it shows the detail of the LEGO model but also how Hobs Studio have removed some of the detail in the centre of the model to reduce the amount of material needed. This reduces the weight although as its largely printed solid it weighs significantly more than the real thing!

Image: Image 09 (click to enlarge)

Conclusion

3D Printing in itself could be done with simply a 3D model (i.e. no data). The data is not driving the output, however the appropriate Level of Detail (which we have discussed before) and an accurate 3D model is important. The output is another way of communicating ideas to clients and other stakeholders. It can be used to convey design ideas during the early phases of a project or to communicate the finished design (as in this case). It simply provides yet another BIM use (or byproduct) for our overall approach to BIM with our LEGO Architecture meets BIM project.

The coolest thing for me though about the 3D Print though is the fact that real LEGO blocks can fit perfectly into it!

So if you’re in our Sheffield studio and want to take a look just give me a shout.

Rob Jackson, Associate Director, Bond Bryan Architects

linkedinicon4

About Hobs Studio

More about Hobs Studio can be found here.

Hobs Studio is part of the Hobs Group. More services can be found here.

Terms and conditions

All content provided on this BIM Blog is for informational purposes only. The owner of this blog makes no representations as to the accuracy or completeness of any information on this site or found by following any link on this site. Bond Bryan Architects will not be liable for any errors or omissions in this information nor for the availability of this information. Bond Bryan Architects will not be liable for any losses, injuries, or damages from the display or use of this information. 

We are happy for others to share our blog pieces through all social media platforms. You may include links to the original blog pieces and use part of the blog to then provide a link to the original content. However we would appreciate it if the content is not reproduced in full on other sites or publications without written consent being granted by Bond Bryan Architects.

This policy is subject to change at any time.

LEGO and the Lego logo are trademarks of the LEGO Group. Any trademarks, service marks, product names, corporate names or named features are assumed to be the property of their respective owners, and are used only for reference, without intent to infringe. 

This post has been viewed 1030 times.

Leave a Reply

Your email address will not be published. Required fields are marked *